58
OPERATION
Driving Safely
Making Turns
Your ATV is equipped with a solid rear axle, which drives both rear
wheels equally at all times. This means that the wheel on the outside
of the turn must travel a greater distance than the inside wheel when
turning and the inside tire m ust slip traction slightly. To turn, steer in
the direction of the turn, leaning your upper body to the inside of the
turn while supporting your weight on the outer footrest. This
technique alters the balance of traction between the rear wheels,
allowing the turn to be made s moothly. The same leaning technique
should be used for turning in reverse.
NOTE: Practice making turns at slow speeds before attempting to turn
at faster speeds.
WARNING
Turning at sharp angles or at excessive speeds can result in vehicle
overturn and lead to serious injury. Avoid turning at sharp angles.
Never turn at high speeds.
To Next Page
Loading...
Need help?
General
