63
PRE-RIDE INSPECTIONS
Start the Engine and Check
n Engine Stop Switch: Check the auxiliary shut-off switch for
proper operation. Push the switch down to stop t he engine. Pull it
up to allow restarting.
n Ignition Switch: Make sure the engine stops when the ignition
switch is turned t o OFF.
n Tether Switch: If your machine has a tether switch, remove the
tether from the switch to make sure the engine stops immediately.
n Lighting: Check the headlight (high and low beam), taillight, and
brake light. Replace burned out lamps before operating.
n Mirror Adjustment (if equipped): Adjust the mirrors so they can
be used to their full advantage.
n Operating Area: Before driving away, check your surroundings.
Be aware of obstacles and make sure bystanders are a safe distance
from the machine.
To Next Page
Loading...
Need help?
General
