Page 20
English
6 Troubleshooting
Using the Information LED
The information LED on the control unit ashes in a specic sequence to indicate one of three possible
cleaner malfunctions.
LED Flashing Solution
1 Flash
LED ashes once
with one second
interval.
• Unplug the oating cable from the control unit and
reconnect.
• If the problem persists, contact your local retailer to
request a diagnostic review or call Polaris Technical
Support.
2 Flashes
LED ashes twice
with one second
interval
• Turn cleaner wheels to ensure they are not jammed.
• Check brushes for debris.
• Start a new cleaning cycle.
• If the problem persists, contact your local retailer to
request a diagnostic review or call Polaris Technical
Support.
3 Flashes
LED ashes three
times with one
second interval
• Clean the lter canister.
• Check the pump axis for debris.
• Check propellor for debris.
• Start a new cleaning cycle.
• If the problem persists, contact your local retailer to
request a diagnostic review or call Polaris Technical
Support.
To Next Page
Need help?
General
