27
SAFETY
Safety Labels and Locations
Warning labels have been placed on the snowmobile for your protection.
Read and follow the instructions of the labels and other warnings on the
snowmobile carefully. If any of the labels depicted in this manual differ
from the labels on your snowmobile, always read and follow the
instructions of the labels on the snowmobile.
If any label becomes illegible or comes off, contact your POLARIS
dealer to purchase a replacement. Replacement safety labels are
provided by POLARIS at no charge. The part number is printed on the
label.
Clutch Warning/Belt Removal
This warning label is found on the oil
bottle:
USE ONLY SYNTHETIC 2-CYCLE
SNOWMOBILE OIL. FOR OPTIMUM
PERFORMANCE USE VES.
WARNING
Do not operate engine with hood or
side panels open.
Do not attempt adjustment with
engine running.
Do not operate engine with the clutch
guard removed.
Never run engine with drive belt
removed.
Never service clutches yourself. See your dealer.
BELT REMOVAL - ALL UNITS
1. For electric reverse models, engine must be stopped in forward
to allow clutch opening.
2. Install L-wrench from fender into the open threaded hole in the
driven clutch.
3. Turn the L-wrench clockwise to open the sheaves and replace
the belt. Return the L-wrench to the fender.
To Next Page
Loading...
Need help?
General
