65
THE PERFECT FIT
Suspension Quick Set-Up Guide
Introduction
Step 3: Adjust shock clickers (if equipped) for ride quality.
For models equipped with monotube shocks, always adjust the rear
track shock spring preload to enhance bottoming resistance.
For models with shock clickers, you can adjust the clickers to control
bottoming and adjust ride comfort.
• Turn a clicker counter-clockwise to decrease damping for a softer
ride.
• Turn a clicker clockwise to increase damping for a stiffer ride and less
bottoming.
NOTICE: Always adjust the clicker at least one click below full stiff (full
clockwise) or shock damage will occur.
Test ride the snowmobile and continue making spring and clicker
adjustments until you achieve the perfect ride.
To Next Page
Loading...
Need help?
General
