25
SAFETY
Safety Labels and Locations
Clutch Warning/Belt Removal
WARNING
Do not operate engine with hood or side panels open. Do not attempt
adjustment with engine running. Do not operate engine with the clutch
guard removed. Never run engine with drive belt removed. Never service
clutches yourself - See your dealer.
Belt Removal - All Units
1. For electric reverse models,
engine must be stopped in
forward to allow clutch
opening
2. Install L-wrench from fender
into the open threaded hole in
the driven clutch.
3. Turn the L-wrench clockwise
to open the sheaves and
replace the belt.
4. Return the L-wrench to the
fender.
Note: See owners manual for
sheave width adjustment
procedure.
7181093
To Next Page
Loading...
Need help?
General
