7515212
A-7515212
“GLACIER-II” PLOW FRAME
KIT PN 2878822
- 2 -
Imprimé en Chine / Printed in China
Applications:
Polaris Ranger 4X4 Mid size 400, 500, 500 Crew, EV
Polaris Ranger 4X4 Full size including XP, HD, 6X6, 800 Crew (2005-2011)
Polaris Ranger RZR and RZR-S
Before you begin, read these instructions and check to be sure all parts and tools are accounted for. Please retain these
installation instructions for future reference and parts ordering information.
Tools Required:
10mm, 13mm, 17mm, 19mm, 24mm Open-end Wrench and Socket
IMPORTANT: Your Polaris accessory is exclusively designed for your vehicle. Please read the installation
instructions thoroughly before beginning. Installation of any item is easier if the vehicle is clean and free of debris.
Approximate Installation Time: 30 minutes
IMPORTANT: Requires plow mount (PN 2877906 or 2878835 (Ranger Models) or 2878824 (RZR Models)).
IMPORTANT
This Kit (PN 2878822) should be installed only on vehicles whose models are listed
above. For use on a vehicle other than those listed above, damage may be caused to your
vehicle.
To Next Page
Loading...
Need help?
General
