31
FEATURES AND CONTROLS
Instrument Cluster
Rider Information Center
The rider information center is located in the instrument cluster. All seg-
ments will light up for 3 seconds at start-up.
1. Gear Indicator - This
indicator displays gear
shifter position.
N = Neutral (Green)
R = Reverse (Amber)
2. Engine Hour Display
Indicator
3. Speedometer
4. Odometer/Tripmeter/
Hour Meter
Modes
Use the reverse override/mode
button to toggle through the 3
standard modes.
Tip: If using the mode button to program the rider information center, or to toggle
through the options, the transmission cannot be in reverse.
Odometer
The odometer records the distance traveled by the vehicle.
Trip Meter
The trip meter records the distance traveled by the vehicle on each trip if
it's reset before each trip. To reset the trip meter, toggle to the trip meter
mode. Press and hold the mode button until the display changes to 0.
In the Rider Information Center, the trip meter display contains a deci-
mal point, but the odometer displays without a decimal point.
Hour Meter
This mode logs the total hours the engine has been in operation.
To Next Page
Loading...
Need help?
General
