124
Maintenance
Engine Oil Change
10. Reinstall the pre-filter drain plug. Torque to 11 ft. lbs. (15 Nm).
11. Remove the dipstick. Add 29 oz. (850 ml) of the recommended oil. Do not overfill.
NOTE: See the specifications section beginning on page 172 for capacities.
12. Reinstall the dipstick.
13. Start the engine. Allow it to idle for one to two minutes.
14. Stop the engine and inspect for leaks.
15. Check the oil level. Add oil as needed to bring the level to the upper mark on the dip-
stick.
16. Dispose of used oil properly.
To Next Page
Loading...
Need help?
General
