57
FEATURES AND CONTROLS
Brake Lever
The brake lever operates the front brakes. It’s located on the right
handlebar. Squeeze the brake lever toward the handlebar to engage
the front brakes. These brakes are hydraulically activated disc type
brakes.
Always test brake lever travel and master cylinder fluid level before
riding. When squeezed, the lever should feel firm. Any sponginess
would indicate a possible fluid leak or low master cylinder fluid
level, which must be corrected before riding. Contact your dealer
for proper diagnosis and repairs.
WARNING
Operating the ATV with a spongy brake lever can result in loss of braking, which could
cause an accident. Never operate the ATV with a spongy-feeling brake lever.
To Next Page
Loading...
Need help?
General
