14
❹ Maintenance
4.1 I Emptying the lter bag
To maintain op mal movement and suc on capabili es, the bag should be emp ed of all debris as soon as it is half full.
• Remove the lter bag clamping clip (P280 - P380) from the hose or the Velcro strips (P3900 Sport).
• Rotate the connector
un l it is released from the hose a er an audible click.
• Remove the Velcro strips (P3900 Sport).
• Open the zip and remove the debris.
• To reinstall the bag, align the markings between the connector and the cleaner's suc on hose, then click it in
place.
• A ach the lter bag clamping clip (P280 - P380) onto the hose or place the Velcro strips (P3900 Sport).
P280 - P380 P3900 Sport
Tip: A dry bag is easier to clean
It is easier to clean the bag when it is dry. Remove the bag and leave to dry before emptying.
Alternate between 2 lter bags so as not to temporarily stop opera on.
4.2 I Cleaning the in-line lter
• Disassemble the in-line lter assembly.
• Rinse the lter in clean water.
• Reposi on by pressing down rmly.
4.3 I Storing and winterising
• Before storing the cleaner for the winter, empty all the water out (damage due to ice is not covered by the guarantee).
• Clean the whole cleaner and the hoses in clean water and leave to dry.
• Store in a dry place, protected from freezing temperatures and away from direct sunlight.
• Remove the universal ng from the pool wall : simultaneously unscrew and pull.
EN
To Next Page
Loading...
Need help?
General
