89
Break-in Period
2. Fill the oil tank with Polaris-recommended oil. NOTE: Always be sure to top off the
oil level whenever refueling.
3. Drive slowly at first. S elect an open area that allows room to familiarize yourself with
vehicle operation and handling.
4. Vary the throttle positions. Do not operate at sustained idle.
5. Perform regular checks on fluid levels, controls and areas outlined on the daily pre-ride
inspection. S ee page 90.
6. After the first tank of pre-mixed fuel has been used, check to see if the oil level in the
oil tank has dropped, indicating that the oil pump is functioning properly. If the level
has not dropped, see your dealer for oil pump bleeding and then repeat the pre-mix
procedure.
To Next Page
Loading...
Need help?
General
