90
Daily Pre- Ride Inspection
WARNING
If a proper inspection is not done before each use, severe injury or death could result.
Always inspect the ATV before each use to ensure it’s in proper operating condition.
Use the following checklist to make sure t he ATV is in proper working condition before
each use.
1. Tires - Check condition and pressures.
2. Fuel and oil tanks - Fill both tanks.
3. All brakes - Check operation/adjustment.
4. Throttle - Check for free operation and
proper closing.
5. Brakelight - Check for proper operation.
6. Daytime running lights (if equipped) -
Check for proper operation.
7. Engine stop switch - Check for proper
function.
8. Wheels - Check for tightness of wheel
nuts and axle nuts; check t hat axle nuts
are secured by cotter pins.
9. Drive chain - Condition and slack; refer to
drive chain adjustment.
10. Air cleaner element - Check for dirt;
clean or replace.
11. Steering - Check for free operation noting
any unusual looseness in any area.
12. Loose parts - Visually i nspe ct vehicle for
any damaged components or l oose
nuts/bolts or fasteners.
13. Riding gear - Wear a helmet, goggles and
protective clothing.
To Next Page
Loading...
Need help?
General
