PRE-RIDE INSPECTION
WARNING
Failure to inspect and verify that the vehicle is in safe operating condition
before operating increases the risk of an accident. Always inspect the vehicle
before each use to make sure it's in safe operating condition.
ITEM REMARKS PAGE
Brake system/pedal travel Ensure proper operation page 132
Brake fluid Ensure proper level page 132
Front suspension Inspect, lubricate if necessary page 101
Rear suspension Inspect, lubricate if necessary page 101
Steering Ensure free operation -
Tires Inspect condition and pressure page 135
Wheels/fasteners Inspect, ensure fastener tightness page 135
Frame nuts, bolts, fasteners Inspect, ensure tightness -
Drive belt Inspect, ensure installed correctly -
Fuel and oil Ensure proper levels, check underneath vehicle
for leaks
page 101
Coolant level Ensure proper level page 111
Coolant hoses Inspect for leaks -
Throttle Ensure proper operation page 34
Indicator lights/switches Ensure proper operation of switches
Ensure proper operation of glow plug indicator
and glow plugs
page 45
page 31
Air filter Inspect and clean without removing from the
vehicle; remove air filter only when replacing it
page 122
Headlamps Check operation, apply POLARIS dielectric
grease when lamp is replaced
page 136
Brake light/tail lamps Check operation -
Seat latch Push down on the seat back to ensure the latch
is secure
-
Seat belts Check length of belts for damage, check latches
for proper operation
page 36
62
OPERATION
Downloaded from ManualsNet.com search engine
To Next Page
Loading...
Need help?
General
