EasyManuals Logo
Home>Polaris>Motorcycle>Ranger 4x4 700 EFI

Polaris Ranger 4x4 700 EFI User Manual

Polaris Ranger 4x4 700 EFI
131 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #46 background imageLoading...
Page #46 background image
43
OPERATION
Starting the Engine
1. Sit in the driver's seat and fasten the seat belt.
2. Apply the brakes. Engage the park brake.
3. Shift the transmission to neutral.
NOTE: Do not press the throttle pedal while starting the engine.
4. Turn the ignition key past the ON/RUN position to START. Engage
the starter for a maximum of five seconds. Release the key when the
engine starts.
5. If the engine does not start within five seconds, release the ignition
switch and wait five seconds. Repeat steps 4 and 5 until the engine
starts.
6. Vary the engine RPM slightly with the throttle to aid in warm up
until the engine idles smoothly.
WARNING
Engine exhaust contains poisonous carbon monoxide and can cause loss of
consciousness resulting in severe injury or death. Never run an engine in an
enclosed area.
NOTICE
Operating the vehicle immediately after starting could cause engine damage.
Allow the engine to warm up for several minutes before operating the vehicle.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Polaris Ranger 4x4 700 EFI and is the answer not in the manual?

Polaris Ranger 4x4 700 EFI Specifications

General IconGeneral
BrandPolaris
ModelRanger 4x4 700 EFI
CategoryMotorcycle
LanguageEnglish

Related product manuals