EasyManuals Logo
Home>Polaris>Utility Vehicle>Ranger 4X4

Polaris Ranger 4X4 User Manual

Polaris Ranger 4X4
124 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #101 background imageLoading...
Page #101 background image
97
MAINTENANCE
Cleaning and Storage
Storage Tips
NOTICE: Starting the engine during the storage period will disturb the
protective film created by fogging and damage could occur. Never
start the engine during the storage period.
Clean the Exterior
Make any necessary repairs and clean the vehicle as recommended. See
page 94.
Stabilize the Fuel
1. Fill the fuel tank.
2. Add Polaris Carbon Clean Fuel Treatment or Polaris Fuel Stabilizer.
Follow the instructions on the container for the recommended
amount. Carbon Clean removes water from fuel systems, stabilizes
fuel and removes carbon deposits from pistons, rings, valves and
exhaust systems.
3. Allow the engine to run for 15-20 minutes to allow the stabilizer to
disperse through the entire fuel delivery system.
Oil and Filter
Change the oil and filter. See page 58.
Air Filter / Air Box
1. Inspect and clean or replace the pre-cleaner and air filter. See page
72.
2. Clean the air box.
3. Drain the sediment tube.
Inspect and Lubricate
Inspect all cables and lubricate all areas of the vehicle as recommended
in the Periodic Maintenance Chart beginning on page 50.
Battery Maintenance
See pages 90-92 for storage and charging procedures.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Polaris Ranger 4X4 and is the answer not in the manual?

Polaris Ranger 4X4 Specifications

General IconGeneral
BrandPolaris
ModelRanger 4X4
CategoryUtility Vehicle
LanguageEnglish

Related product manuals