EasyManuals Logo
Home>Polaris>Offroad Vehicle>Ranger 6x6 2005

Polaris Ranger 6x6 2005 User Manual

Polaris Ranger 6x6 2005
126 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #53 background imageLoading...
Page #53 background image
50
OPERATION
All Wheel Drive (AWD)
When in AWD, the front gearcase will automatically engage anytime
the rear wheels lose traction. When the rear wheels regain traction, the
front gearcase will automatically disengage.
There is no limit to the length of time the vehicle may remain in AWD.
Engaging F ront Gearcase
The AWD switch may be turned on or off while the vehicle is moving.
Initially, the vehicles electronic system will not enable the AWD until
the engine RPM is below 3100. Once enabled, the AWD remains
enabled until the AWD switch is turned off. If the switch is turned off
while the front gearcase is moving, it will not disengage until the rear
wheels regain traction.
See page 49 for AWD switch operation.
Engage the AWD before getting into conditions where front wheel
drive may be needed. If the rear wheels are spinning, release the
throttle before switching to AWD.
CAUTION
Switching to AWD while the rear wheels are spinning may cause
severe drive shaft and gearcase damage. Always switch to AWD
while the rear wheels have traction or are at rest.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Polaris Ranger 6x6 2005 and is the answer not in the manual?

Polaris Ranger 6x6 2005 Specifications

General IconGeneral
BrandPolaris
ModelRanger 6x6 2005
CategoryOffroad Vehicle
LanguageEnglish

Related product manuals