EasyManuals Logo
Home>Polaris>Offroad Vehicle>RANGER 800 XP 2011

Polaris RANGER 800 XP 2011 User Manual

Polaris RANGER 800 XP 2011
100 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #81 background imageLoading...
Page #81 background image
77
MAINTENANCE
Removal from Storage
1. Check the battery electrolyte level and charge the battery if necessary. Install it in the
vehicle. Make sure the battery vent hose is routed properly and that it's not pinched or
restricted in any way.
2. Make sure the spark plug is tight.
3. Fill the fuel tank with fuel.
4. Check all the points listed in the Daily Pre-Ride Inspection section on page 30. Tightness
of the bolts, nuts and other fasteners should be checked by an authorized POLARIS
dealer.
5. Lubricate at the intervals outlined in the Periodic Maintenance Chart beginning on page
43.
Transporting the RANGER
Follow these procedures when transporting the vehicle.
1. Apply the brakes. Engage the park brake.
2. Stop the engine.
3. Place the transmission in gear.
4. Secure the fuel cap, oil cap and seat.
5. Always tie the frame of the RANGER to the transporting unit securely with suitable
straps or rope. Do not attach tie straps to the front A-arm bolt pockets.
6. Remove the key to prevent loss during transporting.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Polaris RANGER 800 XP 2011 and is the answer not in the manual?

Polaris RANGER 800 XP 2011 Specifications

General IconGeneral
BrandPolaris
ModelRANGER 800 XP 2011
CategoryOffroad Vehicle
LanguageEnglish

Related product manuals