67
MAINTENANCE
Gearcases
Transmission (Main Gearcase) (4X4/CREW)
Always check and change the transmission oil at the intervals outlined
in the Periodic Maintenance Chart beginning on page 57. Maintain the
oil level even with the bottom of the fill plug hole threads.
Refer to the Gearcase Specifications Chart on page 66 for recommended
lubricants, capacities and torque specifications. See page 110 for the
part numbers of POLARIS products.
Oil Check
The fill plug is located on the side of the gearcase.
1. Position the vehicle on a level surface.
2. Remove the fill plug.
3. Check the oil level. Add the recommended oil as needed.
4. Reinstall the fill plug. Torque to specification.
Oil Change
The drain plug is located near the bottom of the gearcase.
1. Remove the fill plug.
2. Place a drain pan under the gearcase.
3. Remove the drain plug. Allow the oil to drain completely.
4. Clean and reinstall the drain plug. Torque to specification.
5. Add the recommended oil.
6. Reinstall the fill plug. Torque to specification.
7. Check for leaks. Dispose of used oil properly.
To Next Page
Loading...
Need help?
General
