70
MAINTENANCE
Gearcases
Middle Gearcase (6X6)
Always check and change the middle gearcase oil at the intervals out-
lined in the Periodic Maintenance Chart beginning on page 57. Maintain
the oil level even with the bottom thread of the fill plug hole.
Refer to the Gearcase Specifications Chart on page 66 for recommended
lubricants, capacities and torque specifications. See page 110 for the
part numbers of POLARIS products.
The middle gearcase fill plug is located on the side of the gearcase.
Oil Check
1. Position the vehicle on a
level surface.
2. Remove the fill plug. Check
the oil level.
3. Add the recommended oil as
needed.
4. Reinstall the fill plug. Torque
to specification.
Oil Change
1. Remove the fill plug.
2. Place a drain pan under the
drain plug.
3. Remove the drain plug.
Allow the oil to drain completely.
4. Clean and reinstall the drain plug. Torque to specification.
5. Add the recommended fluid.
6. Reinstall the fill plug. Torque to specification.
7. Check for leaks. Discard used oil properly.
To Next Page
Loading...
Need help?
General
