64
OPERATION
Driving on Slippery Surfaces
When driving on slip-
pery surfaces such as
wet trails, loose gravel,
or ice, be alert for the
possibility of skidding
and sliding. Under
these conditions, fol-
low these precautions:
1. Slow down when
entering slippery
areas.
2. Maintain a high
level of alertness,
reading the trail
and avoiding
quick, sharp turns, which can cause skids.
3. Engage all-wheel drive before wheels begin to lose traction.
4. Correct a skid by turning the steering wheel in the direction of the
skid.
CAUTION
Severe damage to the drive train may occur if the AWD is engaged while the
wheels are spinning. Always allow the wheels to stop spinning before
engaging AWD.
WARNING
Failure to exercise care when operating on slippery surfaces can result in
loss of tire traction and cause loss of control, accident, and serious injury or
death.
Never apply the brakes during a skid.
Do not operate on excessively slippery surfaces.
Always reduce speed and use additional caution when operating on slippery
surfaces.
To Next Page
Loading...
Need help?
General
