SEATS
SEAT REMOVAL
To adjust the seat, do the
following:
1. Pull up on the seat latch
lever
q
located under
the front edge of the
seat.
2. Tilt the seat forward.
3. Lift the seat upward to
remove it from the
vehicle.
4. Reverse this procedure to reinstall the seat. Make sure the seat tabs at the
front edge of the seat slide onto the seat retainer tubes.
5. Press down firmly at the rear of the seat to engage the rear latches.
SEAT ADJUSTMENTS
DRIVER’S SEAT ADJUSTMENT
On seats equipped with an
adjustment lever
q
under the
front edge of the seat, pull the
lever to the left. Slide the seat
forward or rearward to the
desired position. Release the
lever. The seat will lock into the
new position.
38
FEATURES AND CONTROLS
To Next Page
Need help?
General
