36
FEATURES AND CONTROLS
Brakes
Parking Brake
1. Place the transmission in
PARK.
2. Squeeze and release the brake
lever two or three times, then
squeeze and hold.
3. Push the parking brake lock
forward to engage the lock.
4. Release the brake lever.
5. To release the parking brake
lock, squeeze and release the brake lever.
Operating the vehicle while the parking brake is engaged could result in an
accident and serious injury or death. Always release the parking brake lock
before operating.
Steering Lock (if equipped)
Lock the steering to prevent unauthorized use or theft of the vehicle.
1. Turn the handlebars to the full left position.
Tip: The handlebars may also be locked in the full right position.
2. Insert the steering lock key and turn it clockwise.
3. Remove the key.
Tip: Place the steering lock keys in a safe place. The lock must be replaced if
the keys are lost.
4. Reverse the procedure to unlock the steering.
The handlebars are locked in the fully turned position when the steering is
locked. Always unlock the steering before starting the engine.
To Next Page
Loading...
Need help?
General
