EasyManua.ls Logo

Polaris Sportsman 550 XP User Manual

Polaris Sportsman 550 XP
141 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #46 background imageLoading...
Page #46 background image
43
FEATURES AND CONTROLS
Instrument Cluster
Rider Information Center
Information Display Area
Diagnostic Display Mode
The EFI diagnostic display mode is for informational purposes only.
Please see your Polaris dealer for all major repairs.
The diagnostic mode is accessible only when the check engine warning
indicator activates after the key has been turned on. Leave the key on if
you want to view the active code (failure code).
The diagnostic mode becomes inaccessible if the key is turned off and
on and the warning indicator is no longer active. This allows the deter-
mination of persistent as well as intermittent faults.
Inactive codes are stored in the history of the unit. Please see your
Polaris dealer to retrieve inactive codes.
Use the following procedure to view active codes that occur when the
key is on.
1. Place the transmission in PARK.
2. Press and release the SELECT button until the flashing check
engine warning indicator appears in the display.
3. A set of two numbers will also appear in the display.
The 2-6 digit suspect parameter number (SPN) in the information area
indicates which component is generating the fault code.
The 1-2 digit failure mode indicator (FMI) number in the clock area indi-
cates the fault mode, such as open or short circuit.
4. See pages 44-47 for code definitions and failure descriptions.
Tip: More than one fault may be active. Press and hold the MODE button to tog-
gle through all currently active diagnostic codes.

Table of Contents

Questions and Answers:

Polaris Sportsman 550 XP Specifications

General IconGeneral
BrandPolaris
ModelSportsman 550 XP
CategoryOffroad Vehicle
LanguageEnglish

Summary

Essential ATV Safety Information

Safety Training and Gear Requirements

Emphasizes the importance of safety training and wearing appropriate protective gear.

Key Operational Safety Warnings

Covers operational risks, age restrictions, handling gasoline, and passenger rules.

ATV Controls and Components

Safe ATV Operation Procedures

Break-In and Pre-Ride Inspections

Crucial steps for new vehicles' break-in and essential pre-ride checks.

General Driving Practices

Rules for safe operation, including speed, terrain, and rider position.

Specific Terrain Driving Techniques

Covers driving on slippery, uphill, downhill, water, and obstacle-ridden terrain.

Essential ATV Maintenance Guide

Periodic Maintenance Schedule and Lubrication

Outlines service intervals, tasks, and lubrication points for the ATV.

Engine and Drivetrain Service

Covers engine oil, transmission, and gearcase fluid checks and changes.

Troubleshooting ATV Problems

Engine Performance Issues

Addresses drive belt wear, starting problems, engine misfires, and stalls.

ATV Model Specifications

Polaris ATV Warranty Information

Related product manuals