103
MAINTENANCE AND LUBRICATION
Periodic Maintenance Schedule
DESCRIPTION Pre-
ride
Pre-
sea-
son
Mont
hly
or 25
Hrs
3
Mont
hs or
50
Hrs
6
Mont
hs or
100
Hrs
Tune
Up
Item
FUEL SYSTEM (Cont.)
Vent system (oil and fuel)
check-valves; hose routing
I •
Fuel system pressure/vacu-
um test
I
Air intake silencer/water sep-
arator drain line(s)
I/C •
JET PUMP
Drive shaft coupler and bear-
ing housing
I/L I/L I/L •
Drive shaft shroud condition I I •
Bilge system pick-up screens
and hoses
I/C I/C •
Cooling water inlet screen/
hoses, clamps
I/C I/C •
Jet pump intake grate fasten-
ers and condition
I I •
Impeller condition and impel-
ler clearance
I I •
Pump Sacrific ial Anode I I •
Reverse mechanism I/A I/A •
ELECTRICAL
Battery condition, fluid level I I •
Battery vent hose condition/
routing (must be clear)
I I •
Battery and starter cables
(clean connections / tight)
I I I •
Ground cables-condition,
corrosion, fastener torque
I I I
Engine overheat warning/
tone/electrical connections
I I
Lanyard cord/engine stop
switch
I I •