132
MAINTENANCE AND LUBRICATION
Extended Storage
6. Cover the watercraft with an opaque tarp or your Polaris watercraft
cover and store it in a clean, dry place. When storing the
watercraft, make certain the nose i s at a 10_ angle, allowing water
to drain.
Lubrication
1. Remove the spark plugs and pour about one tablespoon of Polaris
Premium 2-cycle oil or Polaris Premium Gold Synthetic 2-cycle oil
into each cylinder.
2. Inspect (change if necessary) and greas e the spark plug threads and
install the spark plugs.
3. Lubricate choke, throttle, and steering cables. See page 105.
4. Lubricate all areas recommended in the maintenance section
beginning on page 105.
5. Remove and store the battery properly. See recommendations on
pages 116-120.