36
CONTROLS AND FEATURES
Controls
1. Jet Pump Outlet Nozzle - Controls the direction of the craft via the
handlebars and is the exit for the jet output.
2. Safety Lanyard Wrist Cord - The lock plate end is fastened to the
engine stop switch on the handlebar. Wrist band end is fastened to opera-
tor’s wrist or PFD. Engine will not start if lanyard lock plate and switch
are not engaged. If disengaged during operation the engine will stop.
3. Seat Latch - Secures the seat in position. When released, provide ac-
cess to engine compartment. NOTE: The number of latches will depend
on the model. Some boats have 1 latch and some have 2.
4. Boarding Platform/Footwell Pads - To assist riders while boarding.
The place for operator and passenger’s feet while riding the watercraft.
5. Drain Plu g(s) - When water gets into the bilge it can be drained
through this plug. Remove the watercraft from the water before draining
the bilge. Be sure the plug is securely closed before launching the water-
craft.
6. Exhaust Outlet
7. Reverse Gate (shown engaged)
To Next Page
Loading...
Need help?
General