23
Using the Function Menu
The Function Menu is used to adjust capture settings in Photo Mode. It contains My Mode, Photo Size,
Quality, Movie Size, EV Compensation, White Balance, ISO, Metering, and Color Mode.
Press the Fn button of your camera to launch the Function Menu.
Press the Fn button again to close the menu.
Menu Options
• The Menu bar displays the current status
of your camera settings. Only the available
functions for the settings are shown as
icon on the menu bar.
• The available options for each item on the
menu bar are shown in the Menu options.
• Use the
or key to move through
the menu selections then press the OK
button to save and apply changes.
Menu bar
My Mode
1. The My Mode function displays the 6 most recent modes
used in order (except Voice Recording). When you move
through the different modes in the menu options, the
items on the menu bar changes synchronously to the
corresponding available settings.
2. This function only appears while using scene mode.
Photo Size
The Photo Size function is used to set the resolution before
you capture the image. Changing the Photo Size affects the
number of images that can be stored in your memory card.
The higher the resolution, the more memory space is
required.
The table below shows the Photo Size values for still images.
Icon Pixel Size
Printing Size
Suggestion
Icon Pixel Size
Printing Size
Suggestion
4608 x 3456 A2 Size
2048 x 1536 4" x 6"
4608 x 3072 Standard print paper
1920 x 1080 HDTV
3264 x 2448 A3 Size
640 x 480 E-mail
2592 x 1944 A4 Size
To Next Page
Loading...
Need help?
General
