• Setting Self-timer
Your camera is designed with a self timer function which will allow you to
take pictures with a count down of 2 or 10 seconds.
1. Set the camera to Still Image mode.
2. Press the
button repeatedly to cycle
through the self-timer settings and select
the one you need.
Display Option Description
--- Single
shot
Record a single image
2
2-SEC Take a picture after a count down
of 2 seconds.
10
10-SEC Take a picture after a count down
of 10 seconds.
Double Take two pictures in a shot after a
count down of 10 seconds
3. Capture procedures are the same as for taking a picture in the normal
capture mode. See page 32.
NOTE:
• This feature is only available in Still Image mode.
• Place the camera on a at surface or use a tripod when using the self-timer function.
To Next Page
Loading...
Need help?
General
