Using the AC adapter
Usage of Adapter
The player is supplied with a switching power adapter.
1. Connect AC adaptor to the side of the DVD player in the slot marked “DC 9.5V IN”.
2. Plug the two-prong end of the power cord to a grounded electrical socket.
Note: Please turn player’s power off first and then unplug the power to prevent
malfunction.
Pre-operation
1. Connecting to power.
2. Lift the main cover up to open the disc tray house.
3. Switch “POWER” to the “ON” position.
4. Adjust the volume with the “VOLUME” adjust knob (also adjusts earphone volume).
Loading a disc
1. Press the OPEN button to open the disc cover.
2. Put disc into the tray house with the printed side up.
3. Close the disc cover.
- 12 -
To Next Page
Loading...
Need help?
General
