To Next PageTo Next PageWhat to do if my POLTI Steam Cleaner does not dispense steam?
If your POLTI Steam Cleaner isn't dispensing steam, it could be due to several reasons: the water tank might be empty (add water as described in Chapter 11), the steam lock on the handle might be activated (deactivate it), the boiler might not be fully pressurized (wait for the steam indicator light), or the steam hose might be trapped or twisted (check and correct the hose).
Why are my floors too wet after using POLTI Steam Cleaner?
If your floors are too wet after using the POLTI Steam Cleaner, it might be due to the initial burst of steam or inactivity (direct the steam jet onto a rag for a few seconds), the steam level being too high (reduce the quantity of steam), or the room temperature being too cold (reduce steam and dispense intermittently).
What to do if steam button broken on POLTI Steam Cleaner?
If the steam does not come out and the cap won’t unscrew on your POLTI Steam Cleaner, the steam button might be broken. If this is the case, take the appliance to an Authorised Service Centre.
How to increase steam pressure on POLTI Steam Cleaner?
If your POLTI Steam Cleaner is pressurized but little steam comes out, the steam adjustment dial might be set to the minimum. Adjust the dial to increase the steam output to your desired level.
Why does the steam ready indicator light turn on and off during use of POLTI Steam Cleaner?
It is normal for the steam ready indicator light to turn on and off during use of the POLTI Steam Cleaner; no action is necessary.
General| Brand | POLTI |
|---|---|
| Model | vaporetto SMART 40 MOP |
| Category | Vacuum Cleaner |
| Language | English |
