To connect your laptop to the network:
1. Make sure that Visual Concert is connected
to the network.
2. Make sure your laptop is ready to connect to
the network:
• Configure the laptop for use with your LAN.
• Obtain a valid network account.
3. Connect the laptop to the Visual Concert.
4. Log in to your network.
Accessing the Network
You can use the Visual Concert to connect to the
network so you can access files, navigate the
internet, or read email, just as you can with the
connection in your office. Up to three users can
connect laptops to the device at one time.
Visual Concert
About Visual Concert Quick Tips
These tips will help you use your laptop with
the Visual Concert™ VSX™ and the VSX 7000
system. The Visual Concert lets you easily:
• Share content with other sites in a
videoconference
• Give a presentation in a local meeting
• Access the LAN, in or out of a call
Setting Up Visual Concert VSX
Note: Your system administrator may have
already set up the Visual Concert for you.
Connect the Visual Concert to the VSX 7000
system and to the network. Then, set it on the
conference table so you can quickly connect
laptops, microphones, and a projector. Or,
mount it in a podium or on a wall for use in a
classroom or in an auditorium. See the Visual
Concert VSX QuickStart for more information.
How to Get Help
If you need help using the VSX 7000 system or
the Visual Concert VSX, go to
www.polycom.com/videodocumentation to
access other documents (such as the VSX
Series Getting Started Guide), or contact your
system administrator.
Visual Concert VSX Quick Tips
To Next Page
Need help?
General
