PolyScience Smoking Gun User Manual

OPERATION
gnikoms derised eht htiw rebmahc gnikoms eht lliF .1
materials and tap down gently. DO NOT OVERFILL.
2. Place the power switch in the “on” position.
smoking materials until they begin to glow. REMOVE
THE FLAME IMMEDIATELY ONCE THE MATERIALS
IGNITE. DO NOT USE A KITCHEN TORCH AS THE
EXCESSIVE HEAT MAY DAMAGE THE UNIT.
Note: you may observe excess smoke venting from
the side and rear of the Smoking Gun™. This is
normal and does not indicate a fault with the unit.
& spiT eeS( .tcudorp doof ot ekoms eht ylppA .4
Techniques)
.”
roirp dnats sti morf ™nuG gnikomS eht devomer uoy fI .6
to use, return it to the stand to hold it in a safe, upright
position until cool.
tinu eht nrut ,nwod delooc sah lerrab latem eht nehW .7
upside down and gently tap the bottom of the smoking
chamber to remove residual smoking material. ALWAYS
EMPTY ASH AND BURNT MATERIAL INTO A NON-
FLAMMABLE RECEPTACLE.

PolyScience Smoking Gun Specifications

General

Brand	PolyScience
Model	Smoking Gun
Category	Smokers
Language	English