3
To open the frame, push the front wheel
lever (highlighted blue) towards the bag
stay and rotate the front wheel assembly
until it locks into place. Secondly, press
the main lock button (highlighted blue)
and lift the handle until the rear and
upper joints click into place.
Reverse the process to fold so that the
handle hook locks into the rear joint.
Unfold Your Trolley
4
IMPORTANT- you must fully charge your battery before using
your trolley. Always recharge your battery within 24 hours of
use. Failure to do so could reduce the life of your battery. See
Section 14 Battery Care, for detailed instructions.
Lithium Battery
Your PowaKaddy trolley features an innovative
Plug’n’Play™ battery system including sprung
terminals and a locking feature to maintain
power connection over uneven terrain. Once
your battery is charged and trolley assembled,
connect your battery as shown.
1. Engage the front of the battery.
2. Press the rear until the battery clips into
position.
3. Press the Power button to turn the
trolley on.
To remove the battery, rst turn o via the
power button. Pull the grey latch to disengage
the battery before lifting from the frame.
Note: The Lithium battery can be stored
within the tray for transportation. Please
ensure you turn o the battery using the
power button. Leaving your battery on with
the Green LED illuminated could lead to your
battery discharging or trolley activating during
transportation.
Turn on and o via
power button
To Next Page
Loading...
Need help?
General
