Assembly
Thank you for purchasing a PowaKaddy RoboKaddy.
Your RoboKaddy is factory programmed and ready for use. However, please
take time to read this manual and practice the various controls before your
first game.
●
Before you do anything else, please put your battery on charge for at
least 24 hours to activate it. To do this, connect your charger to the
battery with the special PowaKaddy Interconnect lead. Now plug the
charger into the mains and leave for 24 hours to activate it.
●
Meanwhile, take time to read this manual and learn about your exciting
new purchase. for a “Quick Start” use the card inside the back cover of
this guide.
●
The PowaKaddy RoboKaddy compromises of a one piece machine that
“snaps” into place in two easy moves, an antenna, handset, zero tip
wheel, battery and charger.
●
With the main section flat on the floor, stand behind the trolley, release the
locking catch beneath the handle by sliding it forward as shown and
pulling up on the main handle.
RoboKaddy
1
To Next Page
Loading...
Need help?
General
