PowerTech PL300E User Manual

3.4 Programmable Function Settings
LED Display Programmable Functions LED Display Programmable Functions
“-L”: The system learning is not done. “LE”: Enter learning mode and then wait for
learning instructions.
“CL”: Reset Factory Setting.
“LP”: The system learning is in progress.
The Auto-learning process of gate moving:
“Gate open to the end- stop close to the
end- stop.”
“OP”: The system is in normal operation To
program, press SET button for 3 seconds,
when the LED display change from OP to 1,
press UP or DOWN to change function
settings (1 to P). Then press SET to enter the
sub function within each group, press UP or
Down to select sub functions and press SET
for confirmation.
8
INSTRUCTIONS PL300E/PL400E/PL500E/PL800E SLIDING GATE OPENER USER MANUAL
LED Display Definition Function Value Description
Options ofGate
Opening direction
Automatic Closing
There actions of the
photocells / safety edge /
loop detector when they
detecting obstacles
Motor Speed
(% full speed)
The deceleration setting
for gate moving
Deceleration Speed
(% full speed)
Over current setting
1
2
3
4
5
6
7
1-1
1-2
2-0
2-1
2-2
2-3
2-4
2-5
2-6
2-7
2-8
3-1
3-2
3-3
4-1
4-2
4-3
4-4
5-1
5-2
5-3
5-4
5-5
6-1
6-2
6-3
6-4
6-5
7-1
7-2
7-3
7-4
7-5
7-6
Clockwise Opening
Counterclockwise Opening
No automatic closing
5 seconds
15 seconds
30 seconds
45 seconds
60 seconds
80 seconds
120 seconds
180 seconds
Please the function setting
after 8
50% Learning Speed
70% Learning Speed
85% Learning Speed
100% Learning Speed
75% of full distance
80%
85%
90%
95%
80%
60%
40%
25%
10%
2A
3A
4A
5A
6A
7A
1. The function can adjust the direction of gate opening.
2. The factory setting is "1-1".
1. This function can cause the gate toclose automatically
after the paused time.
2. The factory setting is "2-2”: 15 Secs as the pause time.
1. Please do the function setting after H & J
2. The factory setting is “3-1”.
1.The function can adjust the running speed of motor.
2.The factory setting is "4-4".
1. The factory setting is “5-1”.
1. The factory setting is “6-4”
1. The function can adjust the running force of motor to
be compatible with the gate weight.
2. The factory setting is "7-5".

PowerTech PL300E Specifications

General

Brand	PowerTech
Model	PL300E
Category	Gate Opener
Language	English