Precor P80 User Manual

Assembling the Treadmill 23
Unpacking the Cables
To connect the console to the base unit, you may need up to
four cables, as follows:
 Ethernet (P80 only)
 Television (P80 only)
 Power (P80 only)
 Base unit data
The first three of these cables are shipped with the P80
console. The base unit data cable is shipped inside the
treadmill fairing.
To unpack the cables:
1. Open the box containing the P80 console. Retrieve the
Ethernet, television, and power cables.
2. Remove any tapes that secure the Ethernet, television,
and power cables, then unwind them and remove any
kinks. Gather the cables into a bundle (referred to later in
this manual as the console cable assembly).

Precor P80 Specifications

General

Brand	Precor
Model	P80
Category	Music Mixer
Language	English