EasyManuals Logo
Home>Prexiso>Analytical Instruments>P40B-3LI

Prexiso P40B-3LI User Manual

Prexiso P40B-3LI
10 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
Troubleshooting
General
1.15-135 ft
0.35 - 40 m
±1/8 in
± 3 mm
1/16 in
1 mm
2
620-690 nm, < 1 mW
Power OFF automatically
Continuous measuring
Dimension (H x D x W)
after 120 s
yes
3-5 h
14 to 140 °F
-10 to 60 °C
32 to 104 °F
0 to 40 °C
2.72 x 0.79 x 1.30 in
69 x 20 x 33 mm
0.082 lb
37 g
Battery service life in
measuring operation, approx.
• Clean the device with a damp,
soft cloth.
• Never immerse the device in water.
• Never use aggressive cleaning
agents or solvents.
Disposal
CAUTION
Warranty
* Favourable conditions are: white and diffuse reflecting
target (white painted wall), low background illumination and
moderate temperatures.
** Tolerances apply with a confidence level of 95%.
The typical measurement uncertainty of ±3mm is valid for
measurements on white, diffusive, reflective targets up to
10m at low ambient light and moderate
temperatures. For distances greater than 10m, the
measurement uncertainty could increase additionally by
0.1mm/m. In unfavourable conditions (such as bright
sunlight, targets with poor reflectivity, or high or low
temperatures) the measurement uncertainty could further
increase up to ±4mm for distances below 10m and
additionally by roughly 0.15mm/m for distances greater
than 10m
Potential issue table
ISSUE CAUSE ACTION
Hardware protection
after shocking
Restart the
device
Low battery
Recharge the
device
Failure to
switch on
All dashes shows
on display
Insufficient
On/Measure/Units
button press
Press the
On/Measure/Units
button firmly
Received signal
too weak/
Measuring time too long
Change target surface
(e.g. white paper)
Received signal
too strong
(target is too reflective)
Change target surface
Ambient light
is too strong
Shadow target area
(e.g. white paper)
The object is out
of rated range
Measure within
rated range
Beam is moved too fast
Move the measuring
tool slowly
Range with favourable
conditions *
Accuracy with
favourable conditions *
Care
Smallest unit displayed
Laser class
Laser type
Weight
Temperature range:
- Storage
- Operation
Technical Data
The battery must not be disposed of with
household waste. Care for the
environment and take them to the
collection points provided in accordance
with national or local regulations.The
product must not be disposed with
household waste. Dispose of the
product appropriately in
accordance with the national
regulations in force in your country.
Adhere to the national and country
specific regulations. Product specific
treatment and waste management can be
downloaded from our homepage.
The Prexiso P40B-3LI has a two-year
warranty.
For further information on this, contact
your dealer.
This warranty is void if product is used for
commercial purposes. This warranty is
not transferable and does not cover
products damaged by misuse, neglect,
accident, alterations or use and
maintenance other than that specified in
the owner's manual. This warranty does
not apply to any expendable parts that
can wear from normal use. This
warranty excludes any accessories.
Lithium
EN
Prexiso P40B-3LI
7

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Prexiso P40B-3LI and is the answer not in the manual?

Prexiso P40B-3LI Specifications

General IconGeneral
BrandPrexiso
ModelP40B-3LI
CategoryAnalytical Instruments
LanguageEnglish

Related product manuals