Pro-Form PROC10 U User Manual

7
3. Set a sturdy piece of packing material under the
front of the Frame (1).
Attach the Front Stabilizer (2) to the Frame (1)
with two M10 x 98mm Screws (53).
Then, remove the packing material.
3
53
2
1
4
4
1
9
65
10, 11
4. Raise the Upright (4) to the vertical position.
Have a second person hold the Upright until
you complete this step.
Attach the Upright (4) to the Frame (1) with four
M8 x 20mm Screws (65); start all the Screws,
and then tighten them.
Next, orient the Front Shield Cover (9) as shown,
and slide it downward onto the Upright (4). Then,
press the Front Shield Cover onto the Right and
Left Shields (10, 11).

Pro-Form PROC10 U Specifications

General

Brand	Pro-Form
Model	PROC10 U
Category	Exercise Bike
Language	English