Declaration of Conformity
Proceq GP8000, Proceq GP8800Products:
all
393 10 x00, XXX XX XXX
The conformity is based on all essential and specific radio test suites for that radio
equipment category identified by the involved Notified Body.
For Proceq GP8000: the notified body IMQ S.p.A. (identification number 0051)
performed the EU-type examination in compliance with Annex III Module B of the
2014/53/EU Directive and issued the EU-type examination Certificate No. 0051-RED-
0043. The frequency range is 200 MHz to 4000 MHz with a maximum output power of
≤ -14 dBm (conducted).
For Proceq GP8800: the notified body Timco Engineering, Inc. (identification number
1177) performed the EU-type examination in compliance with Annex III Module B of the
2014/53/EU Directive and issued the EU-type examination Certificate No. 0048-
190607-01-CE. The frequency range is 400 MHz to 6000 MHz with a maximum output
power of ≤ -14 dBm (conducted).
For Proceq GP8000: This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation. Changes or modifications not
expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
This document (incl. Quick Start Guide and Product Certificates) constitutes an integral
part of Proceq’s General Terms and Conditions of Sale and General Terms and
Conditions of Rental, together with any other guideline, precautions, policies and
conditions which Proceq has made and may make available to you at
www.proceq.com/downloads, as amended from time to time (the Documents). Proceq
reserves the right to change without notice any information, specifications and
recommendations contained in this document and in any of the associated Documents.
You shall observe and be solely responsible for the safe and lawful use of this product,
as well as your conduct while using it and any consequences arising thereof. The use
and operation of this product is at your own discretion and risk. Proceq hereby
disclaims any and all loss, liability or damages resulting from or out of your use of the
product. Please ensure you operate and use this product only for purposes that are
proper and in accordance with the instructions given herein together with all safety and
health precautions, applicable laws, rules, regulations, and as provided for in any of the
Documents.
Notice
Products:
Proceq Part Numbers:
Manufacturer:
Proceq GP8000, Proceq GP8800
393 10 xxx, 393 30 xxx
Proceq SA, Ringstrasse 2
8603 Schwerzenbach, Switzerland
We confirm that the Proceq GP8000 and Proceq GP8800 products conform
with the following directives and standards:
Health:
Safety standards:
Laser classification:
IP classification:
Battery directive:
Restriction of hazardous
substances (RoHS):
Radio equipment directive:
Radio compatibility
EN 62749:2010
EN 61010-1:2010
EN 60825-1:2014
IP 54
2006/66/EC
2011/65/EC
2014/53/EU(RED)
EN 301 489-1 v2.1.1: 2017-02
EN 301 489-33 v2.2.1: 2019-04
EN 61326-1:2013
EN 302 066 v2.1.1: 2017-01
Swiss Made Declaration
We confirm that the Proceq GP8000, Proceq GP8800 instrument was developed and
manufactured in Switzerland and fulfills the requirements needed for the declaration
“Made in Switzerland” or “Swiss Made”.
The requirements for industrial products are specified in detail in the National Swiss
Trademark Protection Statute (Art. 47-50, MSchG) covering goods and services.
Patrick Waller
Chief Operating Officer
Schwerzenbach, 20.05.2019
Products:
Proceq Part Numbers:
Manufacturer:
Proceq GP8000, Proceq GP8800
393 10 xxx, 390 30 xxx
Proceq SA, Ringstrasse 2
8603 Schwerzenbach, Switzerland
Patrick Waller
Chief Operating Officer
Schwerzenbach, 20.05.2019
EN
To Next Page
Loading...
Need help?
General
