To Next PageTo Next PageWhy does my ProForm 1200 Interactive Trainer Treadmill power turn off during use?
The treadmill may be losing power during use because the key is not fully inserted into the console. Try removing the key and re-inserting it completely.
How to fix ProForm Treadmill that does not turn on?
First, ensure that the power cord is properly plugged into a surge suppressor, and that the surge suppressor is plugged into a grounded outlet. Use a single-outlet surge suppressor meeting the required specifications. Note that the treadmill isn't compatible with GFCI-equipped outlets. Also, make sure the key is fully inserted into the console after plugging in the power cord. Finally, check the reset/off circuit breaker; if it protrudes, the circuit breaker has tripped.
How to fix ProForm 1200 Interactive Trainer Treadmill walking belt slowing down when walked on?
If the walking belt slows down when walked on, ensure you are using a single-outlet surge suppressor that meets the necessary specifications. Also, if the walking belt is overtightened, remove the key and unplug the power cord. Then, using the allen wrench, turn both rear roller adjustment bolts counterclockwise, 1/4 of a turn. When the walking belt is properly tightened, you should be able to lift each side of the walking belt 2 to 3 inches off the walking platform.
What to do if ProForm 1200 Interactive Trainer walking belt is off-center or slips?
If the walking belt has shifted to the right, turn the bolt counterclockwise 1/2 of a turn. If the walking belt slips when walked on, first unplug the power cord. Using the allen wrench, turn both rear roller bolts clockwise, 1/4 of a turn. When the walking belt is correctly tightened, you should be able to lift each side of the walking belt 2 to 3 inches off the walking platform.
How to recalibrate incline on ProForm Treadmill?
To recalibrate the incline, insert the key into the console and press one of the Incline buttons. While the incline is changing, remove the key. After a few seconds, re-insert the key. The treadmill will automatically rise to the maximum incline level and then return to the minimum level.
General| Incline | 12% |
|---|---|
| Speed | 0-12 mph |
| Display | 7" |
| Folding | Yes |
| Weight Capacity | 300 lbs |
| Programs | 30+ |
Essential safety rules and warnings for operating the treadmill.
Further safety instructions and warnings for treadmill use.
Steps 1-2 for assembling the treadmill frame and base.
Steps 3-5 for connecting the console and uprights.
Steps 6-8 for final assembly and height adjustments.
How to plug in, turn on, and use the manual operating mode.
Solutions for power not turning on, turning off, and incline problems.
Troubleshooting walking belt speed, centering, and slipping.
