Progress PV1547 User Manual

How to activate the acoustic
signal for the end of the
programme
Make sure the appliance is in user mode.
1. Press the programme button
immediately.
The indicator starts to flash.
2. Wait until the indicator
continues to flash and the remaining
programme indicators are off.
The indicator shows the current
setting:
• is off = The acoustic signal is
off.
• is on = The acoustic signal is
on.
3. Press the programme button to
change the setting.
4. Press the on/off button to confirm the
setting.
AirDry
AirDry improves the drying results with
less energy consumption.
During the drying phase, the
door opens automatically and
remains ajar.
CAUTION! Do not try to close
the appliance door within 2
minutes after automatic
opening. This can cause
damage to the appliance.
AirDry is automatically activated with all
programmes excluding (if applicable).
CAUTION! If children have
access to the appliance, it is
advised to deactivate AirDry as
opening the door may pose a
danger.
How to deactivate the AirDry
Make sure the appliance is in user mode.
1. Press the programme button twice.
The indicator starts to flash.
2. Wait until the indicator
continues to flash and the remaining
programme indicators are off.
The indicator shows the current
setting:
• is off = AirDry is off.
• is on = AirDry is on.
3. Press the programme button to
change the setting.
4. Press the on/off button to confirm the
setting.
BEFORE FIRST USE
1. Make sure that the current level of
the water softener agrees with the
hardness of the water supply. If not,
adjust the level of the water
softener.
2. Fill the salt container.
3. Fill the rinse aid dispenser.
4. Open the water tap.
5. Start a programme to remove any
processing residuals that can still be
inside the appliance. Do not use
detergent and do not put dishes in the
baskets.
After starting the programme, the
appliance recharges the resin in the water
Progress 11

Progress PV1547 Specifications

General

Brand	Progress
Model	PV1547
Category	Dishwasher
Language	English