Protocol AIR HOVER RACER User Manual

OPERATION: FLYING THE DRONE
TAKE–OFF:
1. Press the take off button. The remote will beep and the drone will hover a
few feet off the ground. Then gently advance the throttle to a desired height
and release. The drone will hover at that height.*
OR
2. From Idle mode, gently advance the throttle up to a desired height and
release. The drone will hover at that height.*
LANDING:
1. Press the landing button to lower the drone to the ground.
OR
2. Push down on the throttle until the drone is on the ground.
UP
DOWN
8
NOTE:
* The drone may drift a bit, especially in the first
30 seconds until the altitude sensor gets a good
fix on the position. Some drift is normal.
- EMERGENCY STOP: Press and hold
the Take-Off/Land button for at least
1 second. The engines will shut off
and the drone will fall to the ground.

Protocol AIR HOVER RACER Specifications

General

Brand	Protocol
Model	AIR HOVER RACER
Category	Drones
Language	English