EasyManuals Logo
Home>Protocol>Drones>VENTO WIFI

Protocol VENTO WIFI User Manual

Protocol VENTO WIFI
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #12 background imageLoading...
Page #12 background image
NOTE:
- Emergency Shut Off: When in flight,
pull the throttle and direction stick to
the center at the same time and the
drone will shut off.
OR
Press the Take Off/Landing Button
and hold. The engine will shut off.
* The drone may drift a bit, especially in the first
30 seconds until the altitude sensor gets a good fix on the position.
Some drift is normal.
OPERATION: FLYING THE DRONE
TAKEOFF:
1. Press the take off button. The remote will beep and the drone will hover a
few feet off the ground. Then gently advance the throttle to a desired height
and release. The drone will hover at that height.*
OR
2. From Idle mode, gently advance the throttle up to a desired height and
release. The drone will hover at that height.*
LANDING:
1. Press the landing button to lower the drone to the ground.
OR
2. Push down on the throttle until the drone is on the ground.
UP
DOWN
8

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Protocol VENTO WIFI and is the answer not in the manual?

Protocol VENTO WIFI Specifications

General IconGeneral
BrandProtocol
ModelVENTO WIFI
CategoryDrones
LanguageEnglish

Related product manuals