- 9-
EC Declaration of Conformity
Name and address of the manufacturer:
PROXXON S.A., 6-10, Härebierg, L-6868 Wecker
Produktbezeichnung: DB 250
Artikel Nr.: 27020
In sole responsibility, we declare that this product conforms to
the following directives and normative documents:
EU EMC Directive 2014/30/EC
Applied standards: DIN EN 55014-1 / 05.2012
DIN EN 55014-2 / 02.2016
DIN EN 61000-3-2 / 03.2015
DIN EN 61000-3-3 / 03.2014
EU Machinery Directive 2006/42/EC
Applied standards: DIN EN 62841-1 / 07.2016
Date: 22.03.2018
Dipl.-Ing. Jörg Wagner
PROXXON S.A.
Machine Safety Department
The CE document authorized agent is identical with the signatory.
petrol, cleaning alcohols, etc.) should be avoided, since these
can attack plastic casings.
The apertures required for cooling the motor must always be
kept free of dust and dirt.
Accessories
For more detailed information on accessories, please request
our device catalogue from the address specified on the last
page in the warranty information.
Please note in general:
Proxxon bits and cutters have been designed to work with our
machines, which makes them optimal for their use.
We will not assume any liability whatsoever for the safe and
proper function of our devices when using third-party bits and
cutters!
Service note
Please note: The mains power input may only be replaced by
our Proxxon Service Department or a qualified specialist!
To Next Page
Loading...
Need help?
General
