Thank you for purchasing the Pulsar
®
Elite Series Axial Mini eNail to vaporize any
concentrate! In order to ensure safe use, please read all instructions and safety
warnings before operating. Failure to follow instructions may result in damage or
injury and may void your warranty.
WARNING:
Use with caution. Must be 18 years of age or older to operate. Coil element
becomes extremely hot. Do not touch once powered on. Do not leave
unattended while powered on. Do not attempt to change the shape of the
already formed coil in any way. Do not leave the unit on for longer than 5
continuous hours. Do not let any liquids, waxes or gels touch coil. Do not use
a temperature setting higher than 1200°F. Do not customize or modify unit
internally or externally. Failure to follow cautionary tips may void warranty.
This Kit Includes:
• Pulsar Elite Series Axial Mini eNail Power
and Temperature Control Box with Digital Screen
• Accommodates 25mm Nails
• 5ft. Removable Power Cord
• 4ft. Heating Coil Cord
• Quartz/Titanium Hybrid Nail
• Titanium Carb Cap
• 2 Silicone Stability Rings
Technical Specifications:
Digital Display with Push Button Controls
Rear On/Off Switch
Temperature: 0°F-1200°F
Voltage: 90-150v
Power:150w
Set-Up: Unscrew your chosen bucket from the hybrid nail; insert into the Axial
coil and reassemble the hybrid nail. Plug the coiled heater into the control box.
Plug power cord into the control box and connect to a power outlet. Carefully
fit and insert nail into chosen glass concentrate rig. Make sure all water and nail
assemblies are well-matched and securely placed for use. Special note: When
using the quartz Axial banger accessory, use the included silicone ring to adhere
the banger to the coil for extra stability. Press the power switch on the back of
the control box to turn the unit ON/OFF.
Pulsar
®
Elite Series
Axial Mini eNail Kit Manual
To Next Page
Need help?
General
