Pylontech Force-L2 User Manual

10 / 31
Control Module (FC0048M-100S) Cable Panel
Power Switch
Switch A (1P). ON: the battery system’s controller able to turn on. OFF: whole system turns OFF.
Switch B (2P). Main breaker.
Caution: When the breaker is tripped off because of over current or short circuit, must wait
more than 30min then can turn on it again, otherwise may cause the breaker damage.
Start
Start function: press more than 5sec, to turn on controller.
Black start function: when system turn on, and relay is OFF, press more than 10 sec, and relay
will turn on for 3 min (depends on conditions).
Wi-Fi
Manufacturer: Pylon Technologies Co., Ltd.
Address: Plant 8, No.505 Kunkai Road, JinXi Town, 215324 Kunshan City, Jiangsu Province,
PEOPLE'S REPUBLIC OF CHINA
Importer: XXXX （Located in installed country）
Address: XXXX （Located in installed country）

Pylontech Force-L2 Specifications

General

Brand	Pylontech
Model	Force-L2
Category	Storage
Language	English