Pylontech Force-L2 User Manual

3.5.3 System turns on
.........................................................................................................................
23
3.5.4 System turns off
.........................................................................................................................
24
4. SYSTEM DEBUG
.....................................................................................................................................................
25
5. MAINTENANCE
.....................................................................................................................................................
26
5.1 Trouble Shooting:
............................................................................................................................
26
5.2 Replacement of main component
.......................................................................................
27
5.2.1 Replacement of Battery Module
........................................................................................
27
5.2.2 Replacement of Control Module (BMS)
...........................................................................
29
5.3 Battery Maintenance
.................................................................................................................
30
6. STORAGE RECOMMENDATIONS
.......................................................................................................................
31
7. SHIPMENT
...............................................................................................................................................................
31

Pylontech Force-L2 Specifications

General

Battery Type	Lithium Iron Phosphate (LiFePO4)
Nominal Voltage	51.2 V
Capacity per Module	3.55 kWh
Usable Energy	3.2 kWh
Operating Temperature	-10°C to 50°C
Communication Interface	CAN, RS485
Warranty	10 years
Peak Discharge Current (3 sec)	100 A
Protection Degree	IP20
Cycle Life	6000 cycles at 80% DoD