2023-07-07 22:31 15/15
Victron & Pylontech UP2500, US2000, US3000, US2000C, US3000C, US5000, US5000B, US5000C, Pelio-L, UP5000,
Phantom-S, Force-L1 & L2
Victron Energy - https://www.victronenergy.com/live/
close to fully charged as possible, and then physically connecting the batteries in smaller groups (or
even individually) so that balancing can occur on each individual battery without it being masked by
the others connected in parallel. It may help you to see the indicator lights on the battery (if available
on that model) to find which battery might be out of balance with the others.
2: Contact your Pylontech dealer for further assistance (they can provide additional software to see
individual cell level data), or assist with other potential solutions.
10. Further Information
For information about where to buy or find suitably qualified installers, visit the Where to Buy Page.
Further community discussion about installing and using Pylontech and Victron can found at Victron
Community, use the topic label 'Pylontech'.
LV-Hub specific information
Please discuss large Pylontech systems that require the LV-Hub with your experienced Pylontech
agent FIRST. These additional LV-Hub references are provided without any support or endorsement
from Victron, and should not be assumed to be up to date. Defer to your experienced dealers
recommendations.
Pylontech LV-hub manual
Victron Community discussion on LV-hub configuration settings with Victron
DISQUS
View the discussion thread.
From:
https://www.victronenergy.com/live/ - Victron Energy
Permanent link:
https://www.victronenergy.com/live/battery_compatibility:pylontech_phantom?rev=1687353969
Last update: 2023-06-21 15:26