EasyManuals Logo
Home>Pyronix>Conference System>V2 GSM

Pyronix V2 GSM User Manual

Pyronix V2 GSM
52 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
V2 GSM Installation Manual
Pyronix Ltd Page: 5
CHAPTER 2: INTRODUCTION
The V2 GSM is 2 way GSM audio communication and remote automation module. It can
be used as a stand alone system or it can be connected to the programmable outputs of
any control panel. It requires a SIM card to operate (on any network)
There are 6 inputs onboard. Input No 5 can be programmed as a system status input and
Input No 6 can be programmed as an abort input. A remote 8 inputs expander (RIX) can
be connected to the V2 GSM, giving a maximum of 14 inputs (including the 6 onboard).
There are 4 programmable outputs on-board. Up to 3 remote 16 relay output expanders
(ROX) can be also connected to the V2 GSM giving a maximum of 52 outputs in total.
Up to 9 telephone numbers can be programmed, and either a voice message or SMS text
maybe sent after activation.
The V2 GSM also has a user menu that can be accessed by dialling the V2 GSM directly
(this is a mobile number that is supplied).
The V2 GSM has the following features:
Call any telephone number (just like a mobile phone)
Supports 2 way speech via the on board speaker and microphone
Activate outputs (to turn on lights, open gates, etc)
o Locally via the integrated keypad
o Remotely via SMS or voice menu command
Program voice messages (Up to 14, 1 for each alarm input)
Program SMS messages (Up to 14, 1 for each alarm input)
Send SMS or voice alerts to up to 9 different user phone numbers
View the V2 event log (256 events, time and date)
Remotely by phone operate the V2 using the built in voice menu:
o Listen in
o Talk and listen
o Control output
o Check the status of an external device that is connected to the V2 (for
example system armed or disarmed)
Remotely by SMS text commands operate the V2:
o Change telephone number
o Control outputs
o Check the status of an external device that is connected to the V2 (for
example system armed or disarmed)
The remote output activation facility can be used to control external devices such as
lighting, heating, electronic gates and air conditioning etc.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Pyronix V2 GSM and is the answer not in the manual?

Pyronix V2 GSM Specifications

General IconGeneral
BrandPyronix
ModelV2 GSM
CategoryConference System
LanguageEnglish